Autoclave Falc 600 ATV model

Autoclave Falc 600 ATV model

MAIN FEATURES
Diameter of the sterilization chamber: the 40cm diameter thick sterilization chamber provides more than enough space to meet numerous sterilization requirements.
the microcomputer control system: the intelligent high-speed "Inspiration" microcomputer control system not only allows you to control the entire sterilization process, but also allows easy maintenance, investigation, calibration, registration and future scaling up.
The system allows you to use three levels of administration (user, administrator user and engineer) in order to ensure satisfactory operation and management of the autoclave.
Waste sterilization methods: pre-sterilization procedures of the dedicated waste are available to ensure delivering excellent sterilization of laboratory waste.
Drying function: completely dry in accordance with EC regulations.
Locking opening door in case of cooling temperature in the room not reached: you can set different locking opening door temperatures depending on thermal inertia of the object to be sterilized, so as to prevent opening of the door by the operator , and prevent sunburn in the case where sterilization is not yet completed and the contact with the object is dangerous (especially in the case of liquids).
sterilization temperature: 105 to 138 ° C

FUNCTIONS
mechanical lock: the lock to "eight columns evenly distributed" is more secure and reliable than common locking devices.
Electric dual internal blocks: these blocks allow the control to monitor the temperature and the pressure in the sterilization chamber in real time, and to disable the opening of the door until temperature levels and safe pressure are achieved. In this way the safety and health of the operators is protected.
Six preset procedures: Six sterilization and heating procedures are preset for sterilization, heating and drying of solids and liquids, as well as for melting and heating of the agar.
agar treatment: it is possible to heat, melt and keep the agar heat and preheat the sterilization chamber.
Delayed start: you can set a time program so that the autoclave will automatically start the sterilization procedure at the preset time.
Memory: the operator can set the sterilization parameters and store up to 60 procedures. Controller steam exhaust: once the sterilization procedure is completed, the valve of
vent opens automatically and allows the discharge of vapors to the preset temperature. Calibration interface: interfaces calibration of the temperature and pressure are available.
Automatic water supply: Water level sensors are installed to automatically lock the autoclave and alert the operator by triggering alarms when the water is low.
Monitoring saturated vapors: the system automatically monitors the cold air discharge conditions in such a way as to guarantee a sterilization environment only consists of pure vapors, and to ensure an optimal effect of sterilization.
 

SPECIFICATIONS:
Power supply V / Hz 220 / 50Hz
Weight 113 Kg
608.1002.06 code
Max power 4600 W
Room Material SUS304
Room size (Dia * H, mm) 400 × 700 ф
sterilization temperature 105-138 ° C
of sterilization times range 1-300 minutes
Melting Point 60-100 ° C
Melting speed range 1-9999 minutes
heat storage temperature 45-60 ° C
preset range of drying times 1-300 minutes
Drain Mode Download internal integrated auto-complete in the steam trapping container
door opening type "flip"
Delayed Start Timer preset range for 0 minutes - six days
Nominal working pressure MPa 00:27
Controller intelligent controller for high-speed microcomputer "Inspiration"